Last year, I experimented with embedding small spherical magnets in an elastic fabric in order to simulate a controlled surface deformation: With this assignment, I wanted to recreate a similar effect by embedding the magnets in silicone. First I made a mold by laser cutting plexi and stacking it to get the inverse of what […]
For the nonwoven textile project, I tested felting wool roving with aluminum wool as conductive material. In this quick test, I soldered a small LED to a crimp-beaded aluminum wool. It seems to light up and work! I liked the fact that everything can be felted into one material/surface; no need for stitching conductive thread, […]
One of my favorite painting is Van Gogh’s Starry Night as evidenced through the pictures below. I wanted to recreate an abstract version of this painting using silicon and optic fibers. I first built a molt using Legos, I left holes where fiber optics should go. I then cut up several fiber optics pieces and scored cuts […]
Micro fluidic devices are an emerging topic in Mechanical Engineering and have many applications in chemistry, biology, and medicine. The goal of this project was to create a larger micro fluidic device from silicone to demonstrate some of the properties of low Reynolds number flows without a microscope. A few mili fluidic devices I made in 2.674 are […]
Due: Tuesday, March 20, 2012 Write a program, or modify an existing program, to create a two dimensional pattern and use a laser cutter to turn it into a sheet of lace. You are also welcome to then incorporate the lace into a larger design. Create a post that documents your project and add it […]
Thermochromatic Grid I colored thread with thermochromatic ink (just dipped it in a cup with some liquid color). After it dried I used the bumps of the Lego bricks of the walls of the mold to create a grid with two layers of thread. The original idea was to put current on the tread but […]
This week I made three composite textiles using a duplication polymer that is mostly used in dentistry. I also use this polymer to make many of the samples I use in my research, so I thought it would be fun to use it in new and experimental ways.